Emptying The Dust Cup Assembly; To Empty The Dust Cup Assembly - Shark NV22L Owner's Manual

Emptying the Dust Cup Assembly

For best results empty the Dust Cup
Assembly after each use; empty sev-
eral times during prolonged usage.
Or empty the Dust Cup Assembly
when it reaches the MAX fill line;
NEVER OVER-FILL THE DUST
CUP.
Stand vacuum into upright position.
Turn vacuum off.
1

To empty the Dust Cup Assembly:

1 G rip carry handle and press
the Dust Cup release button to
remove Dust Cup Assembly
2 O ption A: for Quick Empty:
Insert Dust Cup Assembly deep
inside trash receptacle to contain
dust and debris.
P ress the Dust Cup Door release
button; tap container gently to
dislodge and release dust and
debris.
Snap door in place.
Important: If the Dust Cup
Door does not swing open after
pressing the release button,
push the door open using the
bottom door tabs.
8 TOLL FREE: 1-800-798-7398
NV22L_IB_100603.indd 8
CAUTION:
Unplug the vacuum;
failure to do so might
result in electric
shock.
2
3 O ption B: For Allergy Sufferers:
Wrap a trash bag around the
Dust Cup Assembly leaving
space at the bottom for the door
to swing open.
L ocate the Dust Cup Door
release button within the trash
bag and press to release as you
shake the dust cup to empty
dust and debris.
Snap the bottom door in place.
N ote: Option B can also be
performed outside of the home
to further minimize releasing
dust back into the air. Carry just
the Dust Cup Assembly and trash
bag outside.
3
Note: Some dust and debris
may remain in the top of your
dust cup assembly on or near
the metal screen. It is not
necessary to completely remove
this material before continuing
to vacuum; Shark advanced
®
cyclonic action will sweep the
metal screen clean once you
begin to refill your dust cup.
10-07-12 1:50 PM