Temperature Control And Adjustment; Storing Frozen Food - Belling BE814 Installation And User Instructions Manual

TEMPERATURE CONTROL AND ADJUSTMENT

There are three coloured indicator lights located inside the appliance which show the operating
mode of the freezer.
Green Indicator (1)
Illuminates when the appliance is connected to the mains and will glow as long as there is
electricity present. The green light will not glow if the thermostat is set in the 'O' position. The
green indicator does not give any indication of the temperature inside the freezer.
Amber Indicator (2)
This indicator will glow when the fast-freeze switch (4) is on and will continue to glow until
the fast-freeze switch is turned off. The compressor will run continuously whilst the fast-freeze
switch is on. Fast-freeze operation is for freezing fresh food (see Freezing Fresh Food, section).
Red Indicator (3) Illuminates:
a. If the pre-set temperature can not be maintained.
b. If the appliance is overloaded with fresh food.
c. If the appliance door is left open accidentally.
Thermostat knob (5)
The thermostat knob is located on the indicator light frame.
Important:
When you press the fast-freeze switch, there may be a short delay before the compressor
starts to operate. This is normal and not a compressor fault.
4 5 3 1 2

STORING FROZEN FOOD

Prepacked commercially frozen food should be stored in accordance with the
frozen food manufacturer's instructions for a frozen food storage
compartment.
The freezing area is marked with symbol on the door liner.
To ensure that the high quality achieved by the frozen food manufacturer and the
food retailer is maintained the following should be remembered:
1. Put packets in the freezer as quickly as possible after purchase.
2. Do not exceed "Use By", "Best Before" dates on the packaging.
3. Please note that drawers, baskets, flaps, trays are all removable.
9