Select and start a washing programme
Select the washing programme and delay start with the door slightly opened.
The start of the programme or the countdown of the delay start will occur only
after the closure of the door. Until then it is possible to modify the settings.
1 1 . . Check that the baskets have been loaded correctly and that the spray arms are
free to rotate.
2 2 . . Check that the water tap is opened.
3 3 . . Press the On/Off button. The dishwasher must be in setting mode.
4 4 . . Press the button corresponding to the required programme (see "Washing
Close the dishwasher door, the programme starts automatically and in the
digital display 1 horizontal line is visible and will remain on for all the duration
of the programme.
S S e e t t t t i i n n g g a a n n d d s s t t a a r r t t i i n n g g t t h h e e p p r r o o g g r r a a m m m m e e w w i i t t h h d d e e l l a a y y s s t t a a r r t t
1 1 . . After having selected the washing programme, press the delay start button
until the flashing number of hours for the delay start will appear in the digital
display. The commencement of the selected washing programme can be
delayed from 1 to 9 hours.
2 2 . . Close the dishwasher door, the countdown starts automatically. The number in
the display is no longer flashing but fixed with static light.
3 3 . . The countdown will decrease with steps of 1 hour.
4 4 . . The opening of the door will interrupt the countdown. Close the door; the
countdown will continue from the point at which it was interrupted.
5 5 . . Once the delay start has elapsed the programme will start automatically.