10
Operating instructions
The heat setting
Touch the control bar at the necessary heat set-
ting. Change up or down, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting and the counter
starts.
Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
2. Immediately touche the necessary heat setting. After 3 seconds A in the circle comes
on in the display.
To stop the function change the heat setting.
Switching the Power Boost on and off
Power Boost makes more power available to the induction cooking zones. Power Boost is
activated for 10 minutes at most. After that the induction cooking zone automatically
switches back to previous heat setting or the highest one.
To switch on, touch
the circle changes.
To switch off, touch a heat setting 1-14.
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
(
in the circle comes on in the display).
.
in the circle comes on. As the zone gets hotter, the colour of
P
P
14
14
8
8
5
5
3
3
0
0