Specifications - Yamaha PW50(W) Owner's Manual

SPECIFICATIONS

Dimensions:
Overall length:
1245 mm (49.0 in)
1
Overall width:
575 mm (22.6 in)
Overall height:
2
715 mm (28.1 in)
Seat height:
3 485 mm (19.1 in)
Wheelbase:
855 mm (33.7 in)
4
Ground clearance:
105 mm (4.13 in)
Minimum turning radius:
5
1300 mm (51.2 in)
Weight:
With oil and fuel:
6
39.0 kg (86 lb)
Engine:
7 Engine type:
Air cooled 2-stroke
Cylinder arrangement:
8
Forward-inclined single cylinder
Displacement:
3
49.0 cm
9
Bore × stroke:
40.0 × 39.2 mm (1.57 × 1.54 in)
Compression ratio:
6.00 :1
Starting system:
Kickstarter
EAU2633G Lubrication system:
Separate lubrication (Yamaha autolube)
Type:
YAMALUBE 2 or 2-stroke engine oil (JASO
FC grade) or (ISO EG-C or EG-D grade)
Engine oil quantity:
Quantity:
0.3 L (0.32 US qt) (0.26 Imp.qt)
Transmission oil:
Type:
YAMALUBE 4 (10W30) or SAE10W30 type
SE motor oil
Oil change quantity:
0.30 L (0.32 US qt) (0.26 Imp.qt)
Air filter:
Air filter element:
Wet element
Fuel:
Recommended fuel:
Regular unleaded
(AUT)(BEL)(CAN)(CHE)(DEU)(DNK)
(ESP)(FIN)(FRA)(GBR)(GRC)(IRL)(NLD)
(NOR)(PRT)(SWE)(ZAF)
Unleaded gasoline only (AUS)(NZL)
Fuel tank capacity:
2.0 L (0.53 US gal) (0.44 Imp.gal)
Carburetor:
Manufacturer:
MIKUNI
Type × quantity:
VM12SC x 1
Spark plug (s):
Clutch:
Transmission:
gasoline only
Chassis:
Front tire:
8-1
Manufacturer/model:
NGK/BP4HS (AUS)(NZL)
NGK/BPR4HS
(AUT)(BEL)(CAN)(CHE)(DEU)(DNK)
(ESP)(FIN)(FRA)(GBR)(GRC)(IRL)(NLD)
(NOR)(PRT)(SWE)(ZAF)
Manufacturer/model:
DENSO/W14FPL (AUS)(NZL)
Spark plug gap:
0.6–0.7 mm (0.024–0.028 in)
Clutch type:
Wet, centrifugal automatic
Primary reduction system:
Spur gear
Primary reduction ratio:
63/33 (1.909)
Secondary reduction system:
Shaft drive
Secondary reduction ratio:
19/15 × 54/11 (6.218)
Frame type:
Steel tube backbone
Caster angle:
25.50 °
Trail:
50.0 mm (1.97 in)
Type:
With tube