Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha TW125 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
1
removing the screws.
2
1
(×2)
3
4
5
1. Screw
6
2. Remove the defective bulb by
pushing it in and turning it counter-
7
clockwise.
8
9
EAU24131
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
6-31
Replacing a turn signal light
bulb
1
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Turn signal light lens
ECA10680
3. Bulb
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
EAU24201
1
3
2