Seat; Helmet Holder - Yamaha TW125 Owner's Manual

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
1
1. Bolt
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
INSTRUMENT AND CONTROL FUNCTIONS
EAU13970
2
1
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
NOTE:
Make sure that the seat is properly se-
cured before riding.

Helmet holder

1. Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
3-9
1
WARNING
EAU14281
2
3
4
5
6
7
EWA10160
8
9