Starting A Warm Engine; Shifting - Yamaha TRICKER XG250 Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS
NOTE:
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.
1
2
3
4
5
6
7
8
9

Starting a warm engine

Follow the same procedure as for start-
ing a cold engine with the exception
that the starter (choke) is not required
when the engine is warm.
5-2
EAU16640

Shifting

5
4
3
2
N
1
2
1. Shift pedal
2. Neutral position
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the il-
lustration.
NOTE:
To shift the transmission into the neu-
tral position, press the shift pedal down
repeatedly until it reaches the end of its
travel, and then slightly raise it.
CAUTION:
G
Even with the transmission in
EAU16671
1
ECA10260