Supporting The Motorcycle - Yamaha TW125 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
2
3
1. Screw ( 2)
4
2. Push the bulb inward and turn
it counterclockwise.
5
6
7
8
9
1
1. Bulb
3. Place a new bulb in the socket.
Push the bulb inward and turn
it clockwise until it engages
into the socket.
4. Install the lens and the screws.
cC
Do not over-tighten the screws as
the lens may break.
6-34

Supporting the motorcycle

Since the Yamaha TW125 has no
centerstand, follow these precau-
tions when removing the front and
rear wheel or performing other
maintenance requiring the motor-
cycle to stand upright. Check that
the motorcycle is in a stable and
level position before starting any
maintenance. A strong wooden
box can be placed under the
engine for added stability.
Front wheel service
To stabilize the rear of the motor-
EC000108
cycle, either use a motorcycle
stand or place a motorcycle jack
under the frame in front of the rear
wheel to prevent it from moving
from side to side. Then use a
motorcycle stand to elevate the
front wheel off of the ground.
EAU01579