Helmet Holders; Storage Compartment - Yamaha Bulldog BT1100 Owner's Manual

EAU00027

1. Helmet holders

Helmet holders
The helmet holders are located under the
seat. Each of the two helmet-holding ca-
bles provided can be used to secure a hel-
met to either helmet holder
To secure a helmet to a helmet holder
1. Remove the seat. (See page 3-13 for
removal and installation procedures).
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
3. Install the seat.
INSTRUMENT AND CONTROL FUNCTIONS
1

1. Storage compartment

2. Yamaha U-LOCK
EAUB0005
WARNING0
Never ride with a helmet attached to a
helmet holder, since the helmet may hit
objects, causing loss of control and
possibly an accident.
Storage compartment
The storage compartment is located under
the seat. (See page 3-13 for seat removal
and installation procedures).
This storage compartment is designed to
hold a genuine Yamaha U-LOCK. (Other
locks may not fit).
2
1
EWA00015
EAUB0006
3-14
1
1. Tool kit compartment
The tool kit is located at the back of the
storage compartment and held in place
with a strap.
When storing the owner's manual or other
documents in the storage compartment,
be sure to wrap them in a plastic bag so
that they will not get wet. When washing
the motorcycle, be careful not to let any
water enter the storage compartment.
3