Yamaha Fazer FZ6-SHG Owner's Manual page 37

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to "
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Push the start switch.
Does the engine start?
YES
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
YES
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
Does the engine start?
YES
The system is OK. The motorcycle can be ridden.
INSTRUMENT AND CONTROL FUNCTIONS
".
NO
NO
NO
3-23
WARNING
•
The vehicle must be placed on the center-
stand during this inspection.
•
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
3