Table of Contents
Advertisement
8. Place Frontline strips on the appliances. Check that the Frontline strips are in line
with one another.
9. Tighten the fixing plate / retaining grip screws.
10. Inject a line of silicon into the gap between the appliances.
11. Dampen silicon line with a little soapy water.
12. Press rubber block hard against the glass ceramic and draw it slowly along the
gap.
13. Leave silicon until the next day to harden.
14. Carefully remove projecting silicon with a shaving blade.
15. Clean glass ceramic thoroughly.
16. Replace Frontline strips.
Installing more than one Frontline hob
25
Advertisement
Table of Contents
