Managing Battery Power; Storage Guidelines - Honeywell Dolphin 6110 User Manual

Charging Time
The standard capacity 2200mAh Li-ion battery pack requires 6 hours to charge to full capacity, while the
extended capacity 3300mAh pack requires 9 hours. It takes less time if the battery has some charge.

Managing Battery Power

Data and files saved on the Dolphin terminal may be stored in RAM memory; therefore, maintain a
continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert
another charged battery pack in the Dolphin. If the battery pack is low, insert the terminal into a charging
peripheral to power the terminal and begin recharging the battery.
Note: If you remove the battery pack or it completely discharges, all data in RAM is cleared. Always place the
terminal in Suspend mode before removing the battery to ensure that any changes made are saved to the
flash memory.
Note: If the battery is low and the terminal is in Suspend Mode, pressing the
Dolphin 6110 terminal; you must first replace the discharged battery with a fully charged battery or apply A/C
power to the terminal.
Checking Battery Power
Power icons appear in the title bar at the top of the window. Tap on the battery icon to open the Power
Properties or select
status of the battery.

Storage Guidelines

To maintain optimal battery performance, follow these storage guidelines:
• Avoid storing batteries outside the specified range of -4 to 140° F (-20 to 40°C) or in extremely high
humidity.
• For prolonged storage, it is recommended that the battery be at a 40% - 50% charge level, be removed
from the device, and stored in a controlled temperature environment. Following these
recommendations will maximize battery life.
Guidelines for Battery Pack Use and Disposal
The following are general guidelines for the safe use and disposal of batteries:
• Do not disassemble or open crush, bend or deform, puncture or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose
to water or other liquids, expose to fire, explosion or other hazard.
> Settings > System > Power. The Battery screen opens displaying the charge
Power not
button does wake the
3 - 9