Unloading The Dishwasher - Electrolux ESI 68850 User Manual

Electrolux dishwasher
Hide thumbs Also See for ESI 68850:
Table of Contents

Advertisement

24 electrolux unloading the dishwasher
• If the delay start has been selected,
the display will show the time duration
and the end time of the programme.
Once the programme is running the
display shows:
– the phases of the programme pro-
gress,
– updates the running and ending
time of the programme.
Cancel a delay start in progress
• Press start button, follow the dis-
played instructions to cancel the delay
start and return to menu programmes.
• Press start button, the set washing
programme starts automatically.
Interrupt or cancel a washing pro-
gramme in progress ONLY if it's
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress
• Open the dishwasher door; the pro-
gramme will stop. Close the door; the
programme will start from the point at
which it was interrupted.

Unloading the dishwasher

• Hot dishes are sensitive to knocks.
The dishes should therefore be al-
Cancel a washing programme in
progress
• Press start button, follow the dis-
played instructions to cancel the
washing programme and return to
setting mode.
• If a new washing programme is to be
selected, check that there is detergent
in the detergent dispenser.
End of the washing programme
• The dishwasher will automatically
stop.
• A message in the display informs you
that the programme has ended.
If one or both of the salt/rinse aid
messages appear in display and you
postpone the refilling it is anyway
possible to switch off the appliance.
1. Open the dishwasher door, leave it
ajar and wait a few minutes before
removing the dishes; this way they
will be cooler and the drying will be
improved.
2. Switch off the dishwasher by press-
ing the On/Off button.
lowed to cool down before removing
from the appliance.

Advertisement

Table of Contents
loading

Table of Contents