Page 2
Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories...
Contents CONTENTS 4 Safety information 7 Product description 8 Control panel 10 Use of the appliance 10 Setting the water softener 12 Use of dishwasher salt 12 Use of detergent and rinse aid 13 Loading cutlery and dishes 16 Washing programmes 17 Setting and starting a washing programme 18 Care and cleaning...
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property. • To help the environment. • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person.
Safety information • Fill the appliance with salt before you start a washing programme. Remaining salt in the appliance can cause corrosion or make a hole in the bottom of the appliance. • Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent).
Safety information • Make sure not to squash or cause damage to the water hoses when you install the appli- ance. • Make sure that the water couplings are tight to prevent a water leakage. • The first time you use the appliance, make sure that the hoses do not have water leaks. •...
Product description To discard the appliance • To prevent the risk of injury or damage: – Disconnect the mains plug from the mains socket. – Cut off the mains cable and discard it. – Remove the door catch. This prevents children or pets to be closed in the appliance. There is a risk of suffocation.
Control panel Rating plate Filters Lower spray arm Upper spray arm CONTROL PANEL On/off button Programme indicator lights Indicator lights Programme button Delay start button Indicator lights End-of-programme The indicator comes on when: • The washing programme is completed. • You adjust the level of the water softener. •...
Control panel • To set the water softener. Refer to the chapter 'Setting the water softener'. • To deactivate/activate the audible signals. Refer to the section 'Audible signals'. • To cancel a washing programme in progress. Refer to the chapter 'Setting and starting a washing programme'.
Use of the appliance – The audible signals are deactivated. Switch of the appliance to confirm the operation. Do these steps to activate again the audible signals: Follow the procedure how to deactivate the audible signals from point 1 to point 4. The programme light A goes off.
Use of dishwasher salt USE OF DISHWASHER SALT How to fill the salt container 1. Turn the cap counterclockwise and open the salt container. 2. Fill the salt container with 1 litre of water (only for the first time you fill with salt). 3.
Loading cutlery and dishes Close the detergent dispenser. Press the lid until it locks into position. Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing pro- grammes when you use the detergent tablets to fully remove the detergent.
Loading cutlery and dishes • Remove the remaining food from the items. • Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that water does not collect in containers or in bowls. •...
Loading cutlery and dishes Put the knives with the handles up. Mix the spoons with other cutlery to prevent them to bond together. Use the cutlery grid. If the dimensions of the cut- lery prevent use of the cutlery grid, you can easily remove it.
Washing programmes Maximum height of the dishes in: the upper basket the lower basket Higher position 20 cm 31 cm Lower position 24 cm 27 cm Do these steps to move the upper basket to the higher position: Move the front runner stops (A) out. Pull the basket out.
Setting and starting a washing programme Consumption values Programme Programme time (mi- Energy (kWh) Water (litre) nute) 120-130 1,8-2,0 22-24 100-110 1,4-1,6 19-21 130-140 1,0-1,2 14-16 The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values.
Care and cleaning How to cancel a washing programme or a delay start If a washing programme or a delay start has not started, you can change the selection. When a washing programme or a delay start are in progress, it is not possible to change the selection.
Care and cleaning • Flat filter (C). 1. To unlock the filters (A) and (B), turn the handle on the microfilter (B) approxi- mately 1/4 counterclockwise and remove. 2. Hold the coarse filter (A) by the handle and remove it from the microfilter (B). 3.
What to do if… WHAT TO DO IF… The appliance does not start or stops during operation. First try to find a solution to the problem (refer to the chart). If not, contact the service centre. Malfunction Fault code Possible cause Possible solution The appliance •...
What to do if… Malfunction Fault code Possible cause Possible solution The mains plug is not Put in the mains plug. connected in. Blow out fuse in the Replace the fuse. household fuse box. The delay start is set. If you want to cancel the delay start, refer to 'Select and start a washing programme'.
Technical data Problem Possible cause Possible solution There are streaks, milky stains, Rinse aid dosage is too high. Decrease the rinse aid dosage. or a bluish layer on glasses and dishes. Dry water drop stains on Rinse aid dosage is too low. Increase the rinse aid dosage.
Page 23
The packaging materials are environmentally friendly and can be recycled. The plastic com- ponents are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the applicable container at the community waste disposal facilities. WARNING! To discard the appliance, follow the procedure: •...