Honda 08B26-SDA-100A Installation Instructions Manual page 3

A/T Model:
• Gently pry up on the trim ring to release the six
clips, and remove the trim ring.
CLIPS (4)
TRIM RING
4. Pry up on the beverage holder to release the six
clips, and remove the beverage holder.
CLIPS (4)
BEVERAGE
HOLDER
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
CLIPS (2)
2206110K
CLIPS (2)
2206050K
5. Remove the dashboard center holder.
• Open the coin pocket lid and remove the coin
pocket.
• Remove the two self-tapping screws.
• Gently pull out on the dashboard center holder
to release the two retaining clips, unplug the
vehicle connector, and remove the center
holder.
COIN
POCKET
SELF-TAPPING
SCREW (Reuse.)
CLIPS (2)
If the vehicle is not equipped with a cassette or a
multi-media player, go to step 7; otherwise, go to
step 6.
6. Remove the player.
• Remove the player panel by removing the two
self-tapping screws and two clips.
SELF-TAPPING
SCREW
(Reuse.)
AII 30200 (0508)
DASHBOARD
LID CENTER
HOLDER
VEHICLE
CONNECTOR
CLIP
PLAYER PANEL
2206061K
2306141T
3 of 13