Advertisement
With In-Dash CD Changer:
•
Attach one adhesive strip to the bottom of the
CD changer.
•
Set the audio unit on the CD changer and
attach the left and right audio brackets to the
audio unit with the four washer-screws
removed in step 14.
•
Attach the left and right audio brackets to the
CD changer with the four 5 x 8 mm washer-
screws included in the in-dash CD changer kit
to the in-dash CD changer kit. Install in order
shown ( 1 and 2 ).
WASHER-SCREW
(removed in
step 14)
2
1
5 x 8 mm
WASHER-
SCREW
(included
with
the CD
changer)
Insert the washer-
screws through the
lower holes.
© 2004 American Honda Motor Co., Inc - All Rights Reserved.
ADHESIVE STRIP
Clean the CD changer with
isopropyl alcohol before
attaching the strip.
Bottom of the
CD changer
LEFT AUDIO
BRACKET
WASHER-
SCREW
AUDIO UNIT
(removed
in step 14)
CD
1
CHANGER
RIGHT
5 x 8 mm
AUDIO
WASHER-
BRACKET
SCREW
(included
with the CD
changer)
16. Attach the harness clip to the back of the player
or changer. Plug the BUS cable connector into the
audio unit.
With Cassette Player:
AUDIO UNIT
BUS CABLE
CONNECTOR
5 x 8 mm WASHER-SCREW
(included in cassette player)
With In-Dash CD Changer:
AUDIO UNIT
2
HARNESS CLIP
(included with
CD player)
AII 25844-27265 (0406)
HARNESS CLIP
(included with
cassette player)
BUS CABLE
CONNECTOR
4 x 6 mm
WASHER-SCREW
(included with
CD player)
CASSETTE
PLAYER
CD CHANGER
5 of 7
Advertisement
