Loading The Silverware Basket; Adding A Dish - Kenmore 587.1527 Series Use & Care Manual

Hide thumbs Also See for 587.1527 Series:
Table of Contents

Advertisement

Available languages

Available languages

Preparing and Loading Dishes

Loading the Silverware Basket

Cut Injury
Load sharp items (knives, skewers, etc.) pointing
down. Failure to do so may result in injury.
Features and appearance of racks and silverware basket
may vary from your model.
Use suggested loading patterns, as shown, to increase
washability of your silverware.
Load the silverware basket while it is in the bottom rack or
take the basket out for loading on a counter or table.
Place small items like baby bottle caps, jar lids, corn cob
holders, etc., in a covered section. Close the cover to hold
small items in place.
Be sure nothing protrudes through bottom of basket or
rack to block the spray arm.
Do not mix silver and stainless to avoid damaging the
silver finish.
The silverware basket can be separated and placed in
several locations in the bottom rack. Load silverware in all
sections or just one, depending on your load.
When covers are up, mix items in each section of the
basket with some pointing up and some down to avoid
nesting. Water spray cannot reach nested items.

Adding a Dish

To add or remove items after wash cycle starts:
• Unlatch door and wait a few seconds until wash action
stops before opening.
• Add the item and wait a few seconds to allow cold air
to slowly expand inside dishwasher.
• Close door firmly to latch and resume cycle.
Page 12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents