Water Connection - Electrolux ESI 66050X User Manual

Remove all packaging before position-
ing the machine.
If possible, position the machine next to
a water tap and a drain.
This dishwasher is designed to be fitted
under a kitchen counter or work surface.
Attention! Carefully follow the instruc-
tions on the enclosed template for build-
ing in the dishwasher and fitting the
furniture panel.
No further openings for the venting of the
dishwasher are required, but only to let
the water fill and drain hose and power
supply cable pass through.
The dishwasher incorporates adjustable
feet to allow the adjustment of the
height.
During all operations that involve
accessibility to internal components the
dishwasher has to be unplugged.
When inserting the machine, ensure that
the water inlet hose, the drain hose and

Water connection

Water supply connection
This dishwasher may be fed with either
hot (max. 60°) or cold water. Neverthe-
less we advise you a cold water supply.
A hot water supply is not always efficient
with very soiled crockery as it shortens
the washing programmes a lot.
For making the connection itself, the
coupling nut fitted to the machine's sup-
ply hose is designed to screw onto a
3/4" gas thread spout or to a purpose
made quick-coupling tap such as the
Press-block.
water connection electrolux 33
the supply cable are not kinked or
squashed.
Fixing to the adjacent units
The dishwasher must be secured
against tilting.
Therefore make sure that the counter it
is fixed under, is suitably secured to a
fixed structure (adjacent kitchen units
cabinets, wall).
Levelling
Good levelling is essential for correct
closure and sealing of the door.
When the appliance is correctly levelled,
the door will not catch on either side of
the cabinet .
If the door does not close correctly,
loosen or tighten the adjustable feet until
the machine is perfectly level.
The water pressure must be within the
limits given in the "Technical data". Your
local Water Authority will advise you on
the average mains pressure in your area.
The water inlet hose must not be kinked,
crushed, or entangled when it is being
connected.
The dishwasher features fill and drain
hoses which can be turned either to the
left or the right to suit the installation by
means of the locknut. The locknut
must be correctly fitted to avoid wa-
ter leaks.