Yamaha MG20XU Owner's Manual page 26

Controls and Connectors
u [SEND MASTER] section
(*) Only MG20XU, MG20, MG16XU and MG16
AUX1
AUX2
AUX3
(*)
AUX4
MG20XU/MG20/MG16XU/MG16: [AUX1 – 4] knobs
MG12XU/MG12: [AUX1 – 2] knobs
MG20XU/MG20
MG16XU/MG16
For adjusting the levels of the signals output to the [SEND]
jacks and [AUX1 – 4].
26
MG20XU/MG20/MG16XU/MG16/MG12XU/MG12 Owner's Manual
i [GROUP] section
SEND AUX1
[+4dBu]
SEND AUX2
[+4dBu]
SEND AUX3
[+4dBu]
(*)
SEND AUX4
[+4dBu]
MG12XU/
MG12
• [ON] switch
• [GROUP 1-2] fader
• [GROUP 3-4] fader (MG20XU/MG20/MG16XU/
• [ST] switch
(*) Only MG20XU, MG20, MG16XU and MG16
G1 MONI
G2 MONI
GROUP 1-2
ON
ST
GROUP 3-4
ON
ST
G3 MONI
G4 MONI
Turn this switch on ( ) to activate the [GROUP]
fader. The switch lights when on.
For adjusting the level of the signal output to the
[GROUP OUT 1, 2] jacks.
MG16)
For adjusting the signal level to the [GROUP OUT 3, 4]
jacks.
If this switch is on ( ), the signals are sent to the
STEREO L/R bus via the [GROUP 1-2, 3-4] faders.
The GROUP 1 and 3 signal goes to the STEREO L
bus, and the GROUP 2 and 4 signal goes to the STE-
REO R bus.
GROUP OUT 1
[+4dBu]
GROUP OUT 2
[+4dBu]
GROUP OUT 3
[+4dBu]
GROUP OUT 4
[+4dBu]