What To Do, When; Error Messages Are Displayed - Atag VA6011RF User Instructions

Table of Contents

Advertisement

What to do, when ...

Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer's visit is not free of
charge, even during the period of guarantee.

...Error messages are displayed.

If any of the indicators in the control panel, as listed in the table below,
are flashing or are illuminated, you can probably rectify the fault your-
self.
Malfunction
The programme indicator
for the selected wash pro-
gramme is flashing;
the end wash programme
indicator is flashing in the
following rhythm: 1 short
flash with approx. 3 seconds
pause in between:
There is no water entering
the dishwasher.
Possible cause
The tap is blocked or
furred with lime-scale
The tap is turned off.
The filter (where present)
in the threaded hose fit-
ting on the tap is
blocked.
Filters in the base of the
washing compartment
are blocked.
The water inlet hose has
not been correctly laid.
Operating Instructions
Remedy
Clean the tap
Turn the tap on.
Clean the filter in the
threaded hose fitting.
Press the button for the
wash programme that had
already started;
then cancel the wash pro-
gramme (see chapter:
Starting a wash pro-
gramme);
Clean out the filters. (See
chapter: Cleaning the fil-
ters)
Check hose installation.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Va6053rfVa6070rf

Table of Contents