Table of Contents
Advertisement
Operating Instructions
Starting a wash programme
0
1. Check that the dishes and cutlery are stacked in the dishwasher in such
a way that the spray arms are free to rotate.
2. Turn on the tap fully.
3. Close the door.
4. Press the ON/OFF button.
The LED in the ON/OFF button will illuminate.
5. Press the relevant button for the programme required (see "Programme
Table").
The programme display will illuminate. One or two lights will flash in
the programme progress display.
The selected programme will begin after approximately 3 seconds.
L
If
flashes in the programme progress display after the programme
3
has started, please read the section "What to do if...".
Changing / interrupting / cancelling a wash pro-
gramme
Only change or interrupt a wash programme that is in progress if it is
3
absolutely necessary. After the appliance has been closed again, the air
that has entered will be heated significantly and expand. As a result,
water may collect in the base of the appliance and trigger the anti-
flood system.
Changing a wash programme
If you would like to change the wash programme in the first 3 seconds
3
after having selected a programme, briefly press the button for the
new wash programme.
If you would like to change the wash programme after this time, pro-
ceed as follows:
0
1. Press the button for the new wash programme and hold it down.
First, the indicator for the wash programme that is currently running
will flash.
After several seconds only the indicator for the new wash programme
will be illuminated.
2. Release the programme button.
The newly selected wash programme will begin.
26
Hide quick links:
Advertisement
Table of Contents
