Table of Contents
Advertisement
III. Hardware Installation
9. Position the card directly over the PCI slot and insert one end of the board in the
slot first. Carefully press the bus connector on the bottom of the card down into
the slot. Be sure the metal contacts on the bottom of the host adapter are securely
seated in the slot.
10. Anchor the board's mounting bracket to the computer chassis using the screw
from the slot cover you set aside previously.
12. Replace the cover on the system unit.
13. Connect your analog monitor's 15-pin VGA connector to the card and fasten the
retaining screws (if any).
14. Connect other cables and devices if available. (see software section for details)
16
ASUS 3DP-V264GT/PRO & 3DP-V264GT2/TV User's Manual
Advertisement
Table of Contents
