Table of Contents
Advertisement
4. Insert the disk that contains the new BIOS file into the floppy drive. You will
receive the error message, "WARNING! Device not ready." if you proceed to
step 5 without the disk in the drive.
5. At the prompt, "Please Enter File Name for NEW BIOS: _", type in the BIOS
file name that you downloaded from the ASUS website, then press <Enter>.
EZ Flash will automatically access drive A to look for the file name that you
typed. When found, the following message appears on screen.
[BIOS Information in File]
BIOS Version:
WARNING! Continue to update the BIOS (Y/N)? _
If you accidentally typed in a wrong BIOS file name, the error message,
"WARNING! File not found." appears. Press <Enter> to remove the
message, then type in the correct file name. Press <Enter>.
6. At the above prompt, type Y to continue with the update process. Pressing N
exits the EZ Flash screen and reboots the system without updating the BIOS.
The following prompts appear if you typed Y.
Flash Memory:
1. Update Main BIOS area
2. Update Boot Block area
7. Press Y for both items to completely update the main BIOS area and the boot
block area.
DO NOT shutdown or reset the system while updating the BIOS boot
block area! Doing so may cause system boot failure.
8. When the update process is done, the message, "Press a key to reboot"
appears. Press any key to reboot the system with the new BIOS.
ASUS A7V333-X Motherboard
A7V333-X Boot Block
SST 49LF004
(Y/N)? _
(Y/N)? _
2-3
Advertisement
Table of Contents
