Table of Contents
Advertisement
8.
Serial General Purpose Input/Output connector (6-1 pin SGPIO1)
This connector is used for the SGPIO peripherals for the LSI MegaRAID and
Intel Matrix RAID SATA LED.
9.
Serial General Purpose Input/Output connectors (8-1 pin SGPIO2/3)
These connector is used for the SAS chip SGPIO interface that controls the
LED pattern generation, device information and general purpose data.
These connectors functions only when you install an ASUS PIKE SAS RAID
card.
ASUS ESC2000
4-15
Advertisement
Table of Contents
