4.
Insert the RAID driver disk you created earlier to the floppy disk drive, then
press <Enter>.
Windows Setup
ENTER=Continue
5.
Select the RAID controller driver you need from the list, then press <Enter>.
6.
The Windows
disk. When prompted, press <Enter> to continue installation.
7.
Setup then proceeds with the OS installation. Follow screen instructions to
continue.
7-6
Please insert the disk labeled
Manufacturer-supplied hardware support disk
into Drive A:
*
Press ENTER when ready.
ESC=Cancel
F3=Exit
®
Setup loads the RAID controller drivers from the RAID driver
Chapter 7: Driver installation