Download Print this page



Standard Features

Standard Features
240Gb uplink bandwidth / 160Gb available server side bandwidth
Dedicated 4x10Gb internal cross-connect ports between adjacent switches
Non-blocking architecture
Wire-speed switching and IPv4/IPv6 routing on all ports
Supports FCoE (NPV)
Combine up to 4 (8 future) switches into a single virtual switch
QSFP+ ports support 4 x 10Gb with optional breakout cable
SFP+ ports support either 1Gb or10Gb depending on module inserted
Any port can be used for IRF connections
Cut-through switching
Hardware-based wire-speed access control lists (ACLs)
Data Center Bridging (DCBX)
Support for VEPA (IEEE 802.1Qbg)
Remote configuration and management CLI
Standards-based SNMP management via SNMPv1, v2c and v3
Out of band management via Onboard Administrator
Virtual Application Network (VAN)
RJ45 console port
Manager and operator privilege levels
Command authorization via RADIUS
Complete session logging for problem resolution
LLDP Discovery protocol
IPv6 management
Multiple flash images
Multiple configuration files
Network Time Protocol (NTP)
IEEE 802.1X user authentication
MAC-based authentication with RADIUS server
Access Control Lists (ACLs)
Secure FTP
STP Root Guard
DHCP Protection from unauthorized DHCP servers
IP Source Guard
Dynamic ARP protection to prevent eavesdropping
Endpoint Admission Defense (EAD)
Secure management via SSHv2 and SNMPv3
Unicast Reverse Path Forwarding (URPF)
DA - 14612 Canada — Version 6 — January 17, 2014
HP 6125XLG Ethernet Blade Switch
Page 3


   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: