Epson WF-3540 User Manual page 256

6. Select Proceed.
7. Select the cleaning cycle you want to run.
Note: Use the nozzle check pattern to determine which colors need cleaning. You can save ink by
cleaning only selected colors.
When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
8. Select Print Nozzle Check Pattern.
9. Press one of the buttons to confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours. Then
try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or
damaged and needs to be replaced.
Parent topic: Print Head Cleaning
Related tasks
Cleaning the Print Head Using a Computer Utility
Checking the Nozzles Using the Product Touch Panel
Related topics
Replacing Ink Cartridges and Maintenance Boxes
256