CRB1875A_Eng.book Page 155 Thursday, March 27, 2003 1:22 PM
Other Functions
Customize the settings to suit your taste and environment.
sDisplaying the SETUP MENU
1 Press A.MENU (AUDIO) button in each source display.
2 Press 5 or ∞ to select "SETUP", and press A.MENU (AUDIO) button.
The SETUP MENU is displayed as follows:
VIDEO SETTING, AUTO FLAP, REAR MONITOR
You can operate a desired function. For details, refer to the pages for each of the func-
tions.
➲
Select BACK in the MENU display or press BACK/FUNC button to return to the previous
display.
➲
To return to the playback display, press BAND/ESC button.
sSelecting the video
Set so that only the display video can be selected. The display for this MENU is the same
regardless of which source you operate from.
1 Press 5 or ∞ to select "VIDEO SETTING" from the SETUP MENU, and press A.MENU
(AUDIO) button.
2 Press 2 2 2 2 / 3 3 3 3 to select "VIDEO".
Press 2 or 3 until the desired video setting appears in the display.
OFF (off) - VIDEO (video) - BACK UP CAMERA (back up camera) - M-DVD (Multi-
DVD)
➲
If the equipment is connected to a RCA video input, choose VIDEO to view video of the
equipment.
➲
When using a DVD player connected with an RCA cable, if you do not select M-DVD,
there will be no picture even if you switch sources.
➲
When using a DVD player connected with an AV-BUS cable, do not select M-DVD. If
you do, there will be no picture.
➲
If BACK UP CAMERA is not connected, do not select BACK UP CAMERA.
➲
If you select "BACK UP CAMERA", press ∞ to move to BACK UP CAMERA POLARITY,
or use 2 or 3 to select BATTERY and GROUND.
BATTERY : When the gear shift is moved to the REVERSE (R) position, and the
polarity of the connected lead wire is positive.
GROUND :
When the gear shift is moved to the REVERSE (R) position, and the
polarity of the connected lead wire is negative.
155