Pioneer AVIC-800DVD Operation Manual page 102

CRB1875A_Eng.book Page 101 Thursday, March 27, 2003 1:22 PM
(1) PGM (DVD POWER) button
When the operation mode switch is set to "NAVI", the functions set for each source before-
hand becomes available. Function is preset for each source as shown below. Sources not
shown below do not feature this function. (Depending on the component, you can change the
Preprogram. For details, refer to the Head Unit's instructions.)
CD (one disc only),
Multi-CD player,
DVD player (one disc only),
Multi-DVD player :
TUNER :
TV :
External unit :
Not effective with NAVIGATION built-in sources.
When the operation mode switch is set to "AUDIO" or "DVD", the power of DVD player is
turned ON/OFF.
(2) NAVI/AV button
Switches the display to the desired indications. Use to switch between Navigation map dis-
plays and audio component displays.
(3) SRC (SOURCE) button
Switches between sources and switches power ON/OFF. (Depending on the connected units,
operation may differ slightly. Refer to "Switching Sources" in the connected unit's instruc-
tions.)
(4) Cross Key 2 2 2 2 , 3 3 3 3 , 5 5 5 5 , ∞ ∞ ∞ ∞ button
These are used when selecting items such as skipping a track of a CD, return to a previous
track, fast-forward or fast-rewind.
(5) A.MENU (AUDIO) button
Display audio menus.
(6) BACK/FUNC button
Returns you to the previous display.
(7) DISP button
When the operation mode switch is set to "NAVI", the display of the Pioneer AV Head Unit
screen is switched over.
When the operation mode switch is set to "AUDIO" or "DVD", display an Information Dis-
play of DVD. Press once more to change the Information Display of DVD.
(8) BAND/ESC button
This functions as the BAND button when using each source. It also cancels the menu you are
viewing, and returns you to the original display.
(11) Control stick and PLAY/PAUSE button
When the control stick is pushed, voice operation is activated. During voice operation, if you
want to cancel voice operation, push the control stick down.
(14) Operation mode switch
Changes the remote control's mode.
PAUSE
BSM (Press for 2 seconds or more)
BSSM (Press for 2 seconds or more)
FUNC1
101