Download Print this page

Removing The Shelf Supports - Electrolux EKC6461AEW User Manual

Electrolux cooker
Hide thumbs

Advertisement

Table of Contents
WARNING!
Do not attempt to clean catalytic
surface with oven sprays, abrasive
cleaners, soap or other cleaning
agents. This will damage the cata-
lytic surface.
Discolouration of the catalytic sur-
face has no effect on catalytic
properties.

Removing the shelf supports

1
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
Valid with telescopic runners:
The retaining pins on the tele-
scopic shelf runners must point to
the front!
CAUTION!
Make sure that the longer fixing
wire is in the front. The ends of
the two wires must point to the
rear. Incorrect installation can
cause damage to the enamel.
2
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
1.
Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
11.3 Cleaning the top oven
glass panels
The door glass on your product
can be different in type and shape
from what you see in diagrams.
The number of glasses can be dif-
ferent.
Removing the glass:
1.
Open the door.
2.
Push the door trim at both sides to
release the clips. Refer to the picture.
3.
Remove the glass panels.
ENGLISH
21

Advertisement

Table of Contents
loading