Cleaning Between The Outer And Inner Door Glass - Electrolux DTC50GA Instruction Booklet

Cleaning between the outer and inner door
glass.
You can remove the glass from the oven and grill doors if you need to.
Note: For top oven door it is important not to open the door when the
glass is removed because the door is lighter and it will spring shut.
To remove the outer glass
1 Open the door so you can get at the two cross head screws on the
top of the door.
Note: Open top oven door slightly to access screws.
2 Loosen these two screws using a pozidrive screwdriver.
3 You should hold the door glass securely in place with one hand, whilst
removing the screws completely, with the other hand. If you do not do
this, the door glass could fall forward.
4 Using both hands, gently tilt the top of the door glass towards you.
Lift it slightly to disengage the locators at the bottom of the door.
Please note that the door
glass on your product may
differ in type and shape from
that shown in the diagram.
5 Clean the outer and inner glass using hot soapy water and mild
abrasives such as 'Cif'. Do not try to clean the foil which is inside the
door. The foil is there to keep the door cool, if it is damaged it will not
work.
6 Replace the glass by holding it in both hands and gently placing the
locators into the holes of the brackets at the bottom of the door, and
make sure the screw location holes line up.
7 Hold the glass in place with one hand and replace the cross head
screws into the location holes, with the other hand.
8 Tighten the screws using a pozidrive screwdriver. Close the door.
D D O 6 1 G A
31