Installation - Electrolux EKC54504O User Manual

Electrolux cooker
Table of Contents

Advertisement

The oven does not heat
up
The oven lamp does not
operate
Steam and condensation
settle on the food and in
the oven cavity
The display shows
"12.00"
The residual heat indica-
tor does not come on
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

WARNING!
Refer to the Safety chapters.
14.1 Location of the appliance
You can install your freestanding appli-
ance with cabinets on one or two sides
and in the corner.
Problem
Possible cause
The fuse in the fuse box
is released
The oven lamp is defec-
tive
You left the dish in the
oven for too long
A power cut
The cooking zone is not
hot because it operated
only for a short time.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
Remedy
Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.
Replace the oven lamp
Do not leave the dishes in
the oven for longer than
15-20 minutes after the
cooking process ends
Reset the clock
If the cooking zone must
be hot, speak to the
Service Centre.
.........................................
.........................................
.........................................
A
ENGLISH
23
B

Advertisement

Table of Contents
loading

Table of Contents