Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Campbell CD100
Summary of Contents for Campbell CD100
- Page 1 CD100 Mountable Display with Keypad 11/11 C o p y r i g h t © 2 0 1 1 C a m p b e l l S c i e n t i f i c , I n c .
- Page 3 Warranty “PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless otherwise specified in the corresponding Campbell product manual.
- Page 4 SCIENTIFIC, INC., phone (435) 227-2342. After an applications engineer determines the nature of the problem, an RMA number will be issued. Please write this number clearly on the outside of the shipping container. Campbell Scientific's shipping address is: CAMPBELL SCIENTIFIC, INC.
-
Page 5: Table Of Contents
4. Overview...............2 5. Specifications ..............3 6. Installation..............3 7. Operation..............6 8. Maintenance ..............7 Figures 1. Connecting the CD100 to the CR1000 Datalogger ........2 2. Template Measurements ................4 3. Profile of Installed CD100................5 4. Display Menu Overview................7 Table 1. Keyboard Display Key Functions...............6... -
Page 7: Introduction
As a purchased service, Campbell Scientific offers the option of installing the CD100 into an enclosure. 2. Cautionary Statements • The CD100 is not compatible with the CR850 datalogger, nor should it be used in tandem with the CR1000KD keyboard and display on any datalogger. •... -
Page 8: Quickstart
CD100 Mountable Display with Keypad 3. Quickstart 1. If the CD100 is to be mounted into an enclosure bulkhead, refer to Section 6. Installation for instructions. 2. Using an SC12 cable as shown in Figure 1, connect the 9-pin CS I/O port of a CR1000 or other compatible datalogger to the 9-pin CS I/O port on the back of the CD100. -
Page 9: Specifications
1. Use the template shipped with the CD100 or create a template using the measurements shown in Figure 2. Template Measurements. 2. Make the required cuts in the bulkhead. -
Page 10: Template Measurements
CD100 Mountable Display with Keypad Measurement Units = Inches Edge of Edge of CD100 Image Not Actual Size FIGURE 2. Template Measurements... -
Page 11: Profile Of Installed Cd100
CD100 Mountable Display with Keypad FIGURE 3. Profile of Installed CD100... -
Page 12: Operation
CD100 Mountable Display with Keypad 7. Operation An overview of keyboard functions is presented in Table 1. Keyboard and Display Key Function and Figure 4. Display Menu Overview. Detailed descriptions are available in the datalogger manual. TABLE 1. Keyboard Display Key Functions... -
Page 13: Maintenance
Depending on the environment and weather tightness of the installation, dust may accumulate between the surface window and the underlying display elements. If this occurs, return the display to Campbell Scientific for cleaning. Do not disassemble the CD100. The printed circuit ribbon connecting the keypad to the display can be easily torn when not removed properly. - Page 14 CD100 Mountable Display with Keypad...
- Page 16 Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbellsci.com Campbell Scientific Africa Pty. Ltd. (CSAf) PO Box 2450 Somerset West 7129 SOUTH AFRICA www.csafrica.co.za • cleroux@csafrica.co.za Campbell Scientific Australia Pty. Ltd. (CSA)
Need help?
Do you have a question about the CD100 and is the answer not in the manual?
Questions and answers