Video Reverse; Working Orientation - Honeywell 2020 User Manual

Video Reverse

Video Reverse is used to allow the image scanner to read bar codes that are
inverted. The Off bar code below is an example of this type of bar code. If
additional menuing is required, Video Reverse must be disabled to read the
menu bar codes and then re-enabled after menuing is completed. Default = Off.
Note: Images downloaded from the unit will not be reversed. This is a setting
for decoding only.
On
* Off

Working Orientation

Some bar codes are direction-sensitive. For example, KIX codes and OCR can
misread when scanned sideways or upside down. Use the working orientation
settings if your direction-sensitive codes will not usually be presented upright to
the image scanner. Default = Upright.
Upright:
Rotate Code Clockwise 90°:
Upside Down:
Rotate Code
Counterclockwise 90°:
4 - 22