Download Table of Contents Print this page

Making Coffee - Electrolux Café Olé CO 20 Operating Instructions Manual

Coffee machine with timer und frothed milk spout

Advertisement

Table of Contents
g
lock. It remains hot enough to drink for
a lengthy period of time.
3
To ensure that the coffee is uniformly
strong, you should stir it in the jug
after it has been made.
5. Setting the functions with the
operating features (Figure 9)
5.1 Using for the first time
Your appliance has a timer with which
you can set the time of day and pre-
program the switch on time up to
24 hours in advance.
0 Place the mains plug in the socket. The
time display (Figure 9/A) will flash
"0:00". No other indicators will light up.
5.2 Setting the time
Setting the hours:
0 Turn the selector dial for HOURS and
MINUTES (Figure 9/D) to the left to "h"
until the stop is reached and hold it in
this position, until the correct time
(hour) appears in the display (Figure
9/A).
Setting the minutes:
0 Turn the selector dial (Figure 9/D) to
the right to "min" until the stop is
reached and set the minutes in the
same way as the hours.
5.3 Preselecting the start time
0 Press the program button (Figure 9/E).
The PROGRAM indicator (Figure 9/B)
will light up and "0:00" will appear in
the display (Figure 9/A).
After approx. 3 seconds, however, the
display (Figure 9/A) will again show the
current time as set previously and the
PROGRAM indicator (Figure 9/B) will
go out.
0 Turn the selector dial (Figure 9/D) to
the left to "h" until the stop is reached
and set the required hour as described
in 5.2.
0 Now turn the selector dial (Figure 9/D)
to the right to "min" until the stop is
reached and set the required minutes.
The selected start time will appear in
the display (Figure 9/A).
14
5.4 Changing the preselected
start time
0 Press the program button (Figure 9/E)
to change the start time. The pro-
grammed time will appear in the dis-
play (Figure 9/A).
0 Now select the new start time as
described in 5.3.
If you wish to check the programmed
start time, just press the program button
(Figure 9/E). The start time will appear in
the display (Figure 9/A). After approx. 3
seconds the display (Figure 9/A) will
again show the current time.
IMPORTANT: If there is a short inter-
ruption to the power supply of up to
approx. 15 seconds the data will still be
stored. If the interruption to the power
supply is longer the entered data will
be erased and you will need to repro-
gram the clock and start time as
described in 5.2 and 5.3.
You now have the following options
for making coffee:

Making coffee

1.Turning on the appliance
directly
0 Press the on/off button (Figure 9/H).
The ON/OFF indicator (Figure 9/L) will
go on and indicate the start of the
brewing procedure.
At the end of the brewing procedure
you can switch off the appliance by
pressing the on/off button again. The
ON/OFF indicator (Figure 9/L) will go
out.
2. Preparing small quantities of
coffee (3-5 cups)
Your coffee machine has an aroma
switch. The aroma switch guarantees
full coffee flavour even for small quan-
tities (3-5 cups).
0 If you wish to prepare smaller quanti-
ties of coffee, turn the selector dial
(Figure 9/G) to the left to „3-5 cups"
until the stop is reached. The NUMBER
OF CUPS indicator (Figure 9/J) will go

Advertisement

Table of Contents
loading

Table of Contents