Operating The Appliance - Electrolux EHD60150P User Manual

6 electrolux
11
12
with an indicator
+number in the timer display shows
that there is a malfunction.
Residual heat indicator
Warning!
residual heat!

Operating the appliance

On and Off
Touch for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off.
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch the control bar at the necessary heat
setting. The heat setting indicators come on.
The automatic heat up
The Automatic heat up function sets the
highest heat setting for some time, and then
decreases to the necessary level.
Touch . The indicator flashes. Set the heat
setting (1-8). The indicator of the heat setting
comes on. The indicator above
and after some time goes out.
sensor field
Risk of burns from
1-2
6 hours
comes on
selects the cooking zone
starts and stops STOP+GO
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is slightly
heated by the residual heat of the cookware.
onds. The sound operates until you re-
move the object.
• the hob gets too hot (e.g. when a sauce-
pan boils dry). Before you use the hob
again, the cooking zone must be cool.
• you use incorrect cookware.
and after 2 minutes the cooking zone
stops automatically.
• you do not stop a cooking zone or change
the heat setting. After some time
on and the hob stops. See the table.
3-4
5 hours 4 hours
The time of the automatic heat up changes
for different heat settings.
11
10
9
8
7
6
5
4
3
2
1
0
1 2
Switching the Power function on and off
The Power function makes more power avail-
able to the induction cooking zones. The
Power function is activated for 10 minutes at
function
comes on
5 6-9
1.5 hours
3 4 5 6 7
comes
8 9