Disc Operations - JVC EXAD KW-AVX800 Instructions Manual

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the
disc.
If " " appears on the monitor, the unit cannot accept the operation you have tried to do.
• In some cases, without showing " ," operations will not be accepted.
~
Open the monitor panel.
<Open/Tilt> menu appears.
• Shaded icons cannot be used at that time.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
Ÿ
Press [OPEN].
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
!
Insert a disc.
Label side
Monitor panel closes automatically.
If not, press [CLOSE].
Caution:
Do not place your finger behind the monitor panel.
• [OPEN]: Open the monitor panel.
• [EJECT]: Eject the disc.
• [CLOSE]: Close the monitor panel.
• [TILT +/–]: Tilt the monitor panel.
• [Exit]: Erase this screen.
16