HP StorageWorks 3800ux User Manual page 40

Navigation
Table 6: Configuration options
Configuration Name
RECOVERY ON/OFF
RESTORE DEFAULTS
CLEAR ODOMETERS
DUAL PICKER
ON/OFF
STARWARS ON/OFF
NEW PASSWORD
SCSI LOG ON/OFF
SECURE MS ON/OFF
40
Toggles between ON and OFF. If the configuration is set
to ON, the jukebox attempts to recover from errors; if the
configuration is set to OFF, the jukebox immediately
stops moving if an error condition occurs. The default
configuration is RECOVERY ON, and recovery should
remain ON under normal conditions.
Sets all jukebox configurations to default settings.
Sets all jukebox odometers to zero.
Note: Used by service personnel only.
Toggles between ON and OFF. (The default setting is
DUAL PICKER ON, and dual picker mode should
remain ON under normal conditions.) If the
configuration is set to ON, the jukebox runs with dual
picker (disk transport) addressing ON; if the
configuration is set to OFF, the jukebox runs with dual
picker (disk transport) addressing OFF.
Should be set to ON during normal operation. Toggles
between ON and OFF. The ON configuration enables
the vertical sensors; the OFF configuration disables the
vertical sensors.
Note: Used by service personnel only.
Allows you to change the numerical password required
to access the menu choices under the ADMIN* menu on
the jukebox control panel.
Should be set to OFF during normal operation. Toggles
between ON and OFF. Tracks internal SCSI states and
saves the information to a log.
Note: Used by service personnel only.
Toggles between ON and OFF. The ON configuration
disables
loading and ejecting disks. The OFF
enables
configuration
HP StorageWorks 3800ux/7100ux Optical Jukebox User's Guide
Description
loading and ejecting disks.
Default
RECOVERY ON
NA
NA
DUAL PICKER
ON
STARWARS ON
000-000-000
SCSI LOG
OFF
SECURE MS
OFF