Changing The Current Scsi Ids; Configuring The Jukebox - HP StorageWorks 3800ux User Manual

Changing the current SCSI IDs

READY > ADMIN* > SCSI IDS >
To change the SCSI IDs:
1. Follow the instruction in
2. Press NEXT until the setting you want to change displays, and then press
3. Press NEXT or PREV until the new ID that you want displays and then press
4. Repeat
5. Press NEXT until UPDATE displays, and then press ENTER.
6. UPDATE or WAIT FOR UPDATE and then IDS SAVED displays briefly.
7. Press CANCEL until READY displays.
8. Power off the jukebox and then power it back on to save the IDs to the
Note:
mixed-media unit) accept addresses from 0 to 7.

Configuring the jukebox

You can set configurations to customize the way the jukebox operates.
lists the jukebox configuration options.
HP StorageWorks 3800ux/7100ux Optical Jukebox User's Guide
list of SCSI IDs is displayed.
ENTER. The ID begins flashing.
ENTER.
step 2 and step 3
updated.
— If the new settings do not conflict with other SCSI IDs on the bus, SCSI
IDS displays.
— If the new settings conflict with other IDs on the SCSI bus,
CONFLICT-ABORTED displays briefly and then VIEW IDS displays.
Any changes entered are lost, and you must repeat the above steps to set a
new ID.
jukebox flash ROM.
UDO drives accept addresses from 0 to 15. The jukebox and MO drives (in a
"Viewing the current SCSI
until you have changed all the IDs that need to be
Navigation
IDs" on page 37 until the
Table 6
39