Husqvarna SG 13 B Operator's Manual page 7

• Follow all safety instructions. Failure to do so may
result in injury to yourself or others.
• Accident prevention regulations, other general
safety regulations, occupational safety rules and
traffic regulations must be followed without fail.
• All users shall be trained in use of the machine.
The owner is responsible for training users.
• Engage an authorized Husqvarna workshop for all
service and repairs not described in this manual.
• Husqvarna original spare parts are designed and
specified to maintain high quality and correct fit
for optimal durability and life-span. From a safety
point of view, use only Husqvarna original spare
parts.
• Learn how to use the machine and its controls
safely and learn to recognize the safety decals.
• Only use the machine for removing tree stumps. It
is not intended for any other use.
• Check that the machine is in serviceable condition
prior to use; see Maintenance.
• Only use the machine in daylight or in other well-lit
conditions. Keep the machine a safe distance from
holes or other irregularities in the ground. Pay
attention to other possible risks.
• Only allow the machine to be used by adults who
are familiar with its use.
• Never allow persons not trained in the use of the
machine to service it.
• Never allow persons or children not trained in the
use of the machine to operate it. Local laws may
regulate the age of the user.
• People and animals can cause distractions and
cause loss of control of the machine. Always
concentrate and focus on the task.
• Never leave the machine unsupervised with the
engine running.
• Make sure that other people are nearby when you
are using the machine so that you can call for help
should an emergency arise.
• The machine is tested and approved only with the
equipment originally provided or recommended by
the manufacturer.
8 -
HUSQVARNA
SAFETY
WARNING!
The engine can become very hot. To
avoid being burned, you must turn
off the engine and wait until all parts
have cooled before touching the
engine.
WARNING!
Overexposure to vibration may lead
to circulatory or nerve damage,
particularly in people who have
impaired circulation.
Contact your doctor if you
experience symptoms that could
have been caused by overexposure
to vibration. Examples of common
symptoms include numbness, pain,
muscle weakness, change of skin
color or an uncomfortable feeling of
tingling. These symptoms appear
most frequently in the fingers,
hands or wrists.
IMPORTANT INFORMATION
Never use a stump grinder that is damaged
or incorrectly adjusted. Never use the stump
grinder if any component is missing or if it
is not properly assembled. Check that the
cutting tools stop rotating when you reduce
the throttle. If you find yourself in a situation
where you are not sure what to do, always
seek expert assistance. DO NOT try to resolve
problems you are not qualified for.