2.
Unscrew the sludge reservoir (1). Make sure not to
misplace the o-ring (2).
3.
Clean the reservoir and the o-ring using a cleaning
solvent and dry carefully.
4.
Put the o-ring in place in its track and replace the
sludge reservoir. Tighten it moderately to avoid
damaging the threads.
5.
Turn the fuel valve to ON and check for leaks. If it
leaks, replace the o-ring.
Idle Adjustment
WARNING!
Risk for carbon monoxide poisoning.
Perform the adjustment outdoors.
1.
Start the engine and run it until it reaches normal
working temperature.
2.
Adjust the throttle to idle position or so that the
engine runs at the lowest possible speed.
3.
Turn the idle screw so that the engine idles at
1250-1550 RPM.
4.
Increase the idle speed with the throttle and move
it right back to idle position. Check engine speed
again.
MAINTENANCE
1
2
HUSQVARNA
8011-128
8011-128
-37