Lamp Schedule; Osd Display; Power On Adjustment; Temperature Control - Samsung MD32C User Manual

General
Sound Feedback
Auto Power
Standby Control

Lamp Schedule

OSD Display

Power On Adjustment

Temperature Control

- The displayed image may differ depending on the model.
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
Off
•
Off
OSD Display
Auto
Displays or hides a menu item on the screen.
Off
―
Source OSD
Power On Adjustment
0 Sec
You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds)
77
― A warm-up time that is too short may damage the product due to overvoltage.
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77 C.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
― The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
continues to rise, the product will power off to prevent overheating.
Off / On
No Signal OSD MDC OSD
/ /
136