Before First Use; Control Panel - Electrolux EVY8740AA User Manual

4. BEFORE FIRST USE

WARNING!
Refer to the Safety chapters.
If the heating element hangs
down, push it to the top of the ap-
pliance above the supports which
are on the inner walls of the appli-
ance.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Clean-
ing".
4.2 Setting and changing the
time
After the first connection to the mains, all
symbols in the display are on for some

5. CONTROL PANEL

5.1 Electronic programmer
1
Use the sensor fields to operate the appli-
ance.
Sensor
1
2
3
4
2 3 4 5
Function
Field
ON / OFF
OPTIONS
OVEN LIGHT
TEMPERATURE
seconds. For the subsequent few sec-
onds the display shows the software ver-
sion.
After the software version goes off, the
display shows h and 12:00.
Setting the time of day:
1.
Touch or
2.
Touch .
3.
Touch or
4.
Touch or
The Temperature / Time display shows
the new time.
Changing the time of day
You can change the time of day only
when the appliance is off. Touch
flashes in the display. To set the new time
of day, use the above procedure.
6
Description
To activate and deactivate the appliance.
To set an oven function, an automatic
programme or a cleaning function.
To activate or deactivate the oven lamp.
To set and see the cavity temperature.
ENGLISH 7
to set the hours.
to set the minutes.
.
.
7 8 9 10 11