Husqvarna Regina Gastronome QSG1000X Instruction Manual page 8

The fry-top is equipped with adjustable heat settings. The entire cooking
surface can be used, or only one of the two halves, front or rear.
The knobs that regulate the energy individually control the temperature of the
two heating elements. A red light indicates that the appliance is heating.
DESCRIPTION OF CERAMIC HOB CONTROL KNOBS
Besides the normal knobs that regulate the energy, the
ceramic hob is equipped with knobs for differentiated
heating. Settings from 1 to 11 control the heating of the
internal element, setting the knob to the symbol
outer element also operates.
The electric oven is controlled by two knobs: function
switch knob and thermostat knob. They allow you to
choose the most suitable type of heating for different
cooking requirements, by switching on the heating
elements
temperature from 50°C to MAX (250°C).
The V setting on the thermostat knob operates the oven fan.
Below the oven knobs there are two warning lights: the red light signals the oven is working; the
orange light indicates that the preset temperature has been reached. The orange light switches on
and off to indicate when the thermostat switches on to maintain the temperature inside the oven at
the level set on the thermostat knob.
The oven has an internal light. The light is always on while the oven is working: it can be switched
on while the oven is off, for cleaning purposes, by turning the function switch knob to the symbol
8
Instructions for the user
DESCRIPTION OF FRY-TOP CONTROL KNOB
LAYOUT OF HEATING ELEMENTS - Description of symbols
REAR
LAYOUT OF CERAMIC HEATING ELEMENTS - Description of symbols
REAR LEFT
FRONT LEFT
CENTRAL
DESCRIPTION OF ELECTRIC OVEN KNOBS
appropriately and
the
setting the required
FRONT
REAR RIGHT
FRONT RIGHT