Download Print this page

Operating Sequence; End Of The Washing Programme; Unloading The Dishwasher - Electrolux ESF 4150 Instruction Book

Hide thumbs

Advertisement

Operating sequence

1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off push button
The On/Off indicator light illuminates.
5. Setting and starting the programme
To select a programme, press the push button of the
programme you wish to select, the indicator light of the
push button illuminates and in the digital display will
appear, flashing, the running time of the programme that
has been set. The phase indicator lights foreseen for that
programme will illuminate.
After about 3 seconds from the last pressure of a push
button the programme starts automatically.
In the digital display the running time of the programme is
no longer flashing and the indicator lights of the phases
will turn off except for the phase underway.
6. To interrupt cancel a washing
programme in progress
Interrupt or cancel a washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
To interrupt a washing programme in
progress
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point
in which it was interrupted.
b) Press the On/Off push button, in this case all the
indicator lights turn off (except for the On/Off indicator
light). Press the On/Off push button again; the
programme will start from the point in which it was
interrupted.
To cancel a washing programme in
progress
To cancel a washing programme you have to reset the
dishwasher; press simultaneously the function push
buttons 2 and 3 for about 2 seconds, the indicator light of
the running programme starts flashing for about 2
seconds. After about 2 seconds all the indicator lights will
turn off (except for the On/Off indicator light) indicating that
the running programme has been cancelled.
If a new washing programme will be selected, check that
there is detergent in the detergent dispenser.
7. Setting the "delay start"
The setting of the delay start occurs before selecting
the programme
Press the On/Off push button.
Press the delay start push button until the flashing
number of the hours for the delay start will appear in the
digital display (from 1h to 19h).
Select a washing programme. In the digital display will
appear, for a moment, the running time of the programme
and then again appears the selected delay start time.
As soon as the number of hours is displayed without
flashing, the countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
The opening of the door during the countdown will not
modify the delay start.
Once the delay start has elapsed the programme will
start automatically.
To cancel the "delay start" in progress
To cancel a delay start in progress you have to reset the
dishwasher; follow the same instructions given in "To
cancel a washing programme in progress". Cancelling a
delay start involves also the cancelling of the setted
washing programme.
In this case you have to set the washing programme
again.

8. End of the washing programme

The dishwasher will automatically stop.
The end of programme (END) indicator light is
illuminated.
In the digital display appears 0 (remaining programme
time), only in this case the programme has ended.
Switch off the dishwasher by pressing the On/Off push
button.
Open the door and wait a few minutes before removing
the dishes; in this way they will be cooler and the drying
will be improved.

9. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Water may appear on the sides and the door of the
dishwasher as the stainless steel will eventually become
cooler than the dishes.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
14

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Esf 4151