Table of Contents
Advertisement
Possibilities for insertion
Kitchen unit with door
Proper arrangements must be taken in designing the
forniture unit, in order to avoid any contact with the
bottom of the hob which can be heated when it is
operated. The recommended solution is shown in
Fig.11.
The panel fitted under the hob should be easily
removable to allow an easy access if a technical
assistance intervention is needed.
Kitchen unit with oven
The hob recess dimensions must comply the indication
given in Fig.9 and must be provided with brackets to
allow a continuous supply of air.
To avoid overhating, the building in should be carried out
as shown in Figs. 12 and 13.
The hob's electric connection and the oven's one must
be carried out separately, both for safety reasons and
to allow the oven to be easily taken off the unit.
Fig. 11
FO 2044
a) Removable panel
b) Space possibly useful for
connections
10
Fig. 12
FO 2041
Fig. 13
FO 2042
Advertisement
Table of Contents
