Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for AXIOMTEK AX92801 Series
- Page 1 AX92801 Series ® Dual Intel Gigabit LAN By-Pass Adapter Card User’s Manual...
- Page 2 AXIOMTEK does not warrant or assume any legal liability or responsibility for the accuracy, completeness or usefulness of any information in this document. AXIOMTEK does not make any commitment to update the information in this manual.
-
Page 3: Esd Precautions
Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Trademarks Acknowledgments AXIOMTEK is a trademark of AXIOMTEK Co., Ltd. ® Windows is a trademark of Microsoft Corporation. Phoenix & AWARD are trademarks of Phoenix Technology Ltd. -
Page 4: Table Of Contents
Table of Contents Chapter 1 Introduction ..............1 1.1 Specifications ................ 2 1.2 Mechanical/Environmental ............ 3 1.3 Features ................3 Chapter 2 Jumpers and Connectors ..........5 2.1 Placement................5 2.2 Jumper Settings..............6 2.3 Connectors ................10 Appendix ..................11... -
Page 5: Chapter 1 Introduction
AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual C h a p t e r 1 Introduction AX92801 is a PCI 32-bit LAN by-pass adapter card that supports dual gigabit ports w/WDT (Watch Dog Timer) for LAN by-pass feature enabling. The LAN by-pass function ensures all network traffic passing through the device in the event of a host system failure, power off, or upon software request. -
Page 6: Specifications
AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual Specifications Interface PCI 32-bit/33MHz ® LAN Chipset Intel 82541PI IEEE802.3ab, 1000Base-T Protocol IEEE802.3u, 100Base-TX IEEE802.3, 10Base-T Media Interface 2-Port RJ-45 w/LED (Act/Link and Transfer rate) Cabling Category 5/5e or above, 4-pair Length 100 meters maximum Two LAN (10/100/1000Mbps) ports support LAN by-pass. -
Page 7: Mechanical/Environmental
AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual Mechanical/Environmental Form Factor PCI 32-bit (120mm x 70mm) Link/Act with Transfer rate (RJ-45), LAN by-pass (pin header) Operating Temp. 0°C ~ 60°C Storage Temp. -20°C ~ 70°C (-4~158°F) Humidity 5% - 95% RH, non-condensing Features Dual Gigabit ports w/LAN bypass function Jumper selection by PICMG or Arbiter control mode... - Page 8 AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual MEMO Introduction...
-
Page 9: Chapter 2 Jumpers And Connectors
AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual C h a p t e r 2 Jumpers and Connectors Placement Length 120 mm Width 70mm, excluding the gold colored contacts. Jumpers and Connectors... -
Page 10: Jumper Settings
AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual Jumper Settings Proper jumer settings configure the AX92801 to meet your application purpose. We are herewith listing a summary table of all jumpers and default settings for onboard devices, respectively. Description Function Jumper Setting Bypass Mode... - Page 11 AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual Description Function Jumper Setting PCI AD26 Lan2 ID (Default) PCI AD30 PCI AD31 Normal ByPass Function Selection Bypass Mode (Default) Enabling LAN ByPass ByPass Selection Disabling LAN Bypass (Default) Jumpers and Connectors...
- Page 12 AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual Description Function Jumper Setting PCI Slot (Default) Mode Selection PICMG JP11 Lan1 IRQ JP11 Default Jumpers and Connectors...
- Page 13 AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual Description Function Jumper Setting JP10 Default Lan2 IRQ JP10 Jumpers and Connectors...
-
Page 14: Connectors
Connectors connect the card with other parts of the system. Loose or improper connection might cause problems. Make sure all connectors are properly and firmly connected. Here is a summary table shows you all connectors on the AX92801 Series. Connectors Label... -
Page 15: Appendix
AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual A p p e n d i x This LAN by-pass card uses different jumper settings while working with various NA system platforms. All possible jumper settings are listed as follows: NA-806 / NA-0043 Series 2-3 (Short) 1-2 (Short) open NA-820... - Page 16 AX92801 Gigabit LAN By-Pass Adapter Card User’s Manual MEMO Appendix...
Need help?
Do you have a question about the AX92801 Series and is the answer not in the manual?
Questions and answers