Fitting the hinged door
1. Fit the two lateral bars A as in the figure opposite.
Use aligning disks B.
2. Stand the machine in front of the kitchen unit into
which it is to be installed. Place cable and hoses
into the neighbouring unit.
As you push the machine in, keep on pulling the
cable and hoses through and ensure that they do
not become kinked.
3. Align the machine laterally in the plinth area with
the angle AN, tighten the screw V slightly.
4. Screw the bottom unit of the hinge onto the hinge
support (use Euro screws 4.0x20.).