Download  Print this page

Cleaning The Spray Arms - Electrolux ESL5391 Operating Instructions Manual

The fully integratable dishwasher
Hide thumbs

Advertisement

Cleaning the spray arms

Regularly check the nozzles in the three spray arms
for blockages. If necessary, clean the nozzles with a
piece of fine wire or a fine needle and a strong water
jet.
1
Do not damage the nozzle openings.
Top spray arm
1. Undo the fixing screw (A) by turning anti-clock-
wise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing screw.
4. Fasten the spray arm with the fixing screw (A) turn-
ing clockwise.
Middle spray arm
1. Remove the middle spray arm by turning it lateral-
ly.
The two-part spray arm bearing is held together by
a tension spring (B)
2. Clean spray arm nozzles.
3. To re-fit, press the middle spray arm upwards until
you feel it snap into place.
Lower spray arm
1. Undo the fixing screw (C) by turning anti-clock-
wise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing screw.
4. Fasten the spray arm with the fixing screw (C) turn-
ing clockwise.
25

Advertisement

loading